<s id="p9sg4"></s>
<track id="p9sg4"><span id="p9sg4"></span></track>

    1. <option id="p9sg4"></option>
      <track id="p9sg4"></track>
        <track id="p9sg4"></track><track id="p9sg4"></track>
      1.  

        High Load Low Friction Eye/Ring

        High Load Low Friction Eye/Ring

        High Load Low Friction Eye/Ring with Dyneema loop

        The Barton High Load Low Friction Eye/Ring with loop is available in 3 sizes and can be used in various applications on board including barber hauler, preventers, mast base block tidies, emergency blocks, occasional blocks and toe rail blocks etc.

        The High Load Low Friction Eye/Ring combined with the Dyneema loop gives you a fast, efficient, simple and extremely strong solution to changing the direction of any line. The ‘Spectro’ anodised aluminium eye is designed to have very good wear resistant properties with low friction, this combined with the Dyneema loop gives you exceptional low weight to very high performance load ratio.

        High Load Low Friction Eye/Ring

        Available in 6 sizes. Manufactured in marine grade aluminium and finished in our unique hard ‘Spectro’ grey anodising. These lightweight high load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast base tidies to stanchion lead eyes. The smallest size can be attached using a 3mm line with a bullseye diameter of 6mm. The largest size can be attached using a 16mm line with a bullseye diameter of 28mm.

        Removable Mainsheet Track System
         
        Part No.  
        External
        Ø mm
        Internal Rope
        Ø mm
        Bore Dia
        Ø mm
        Length
        mm
        SWL
        Kg
        Weight
        g

        High Load Low Friction Eye/Ring with Dyneema loop

          External mm Internal mm Bore Dia Length SWL Weight g
        High Load Low Friction Eye/Ring with Dyneema loop - 12mm
        60 460 - - 12 100 750 11
        High Load Low Friction Eye/Ring with Dyneema loop - 22mm
        60 461 - - 22 230 2400 91
        High Load Low Friction Eye/Ring with Dyneema loop - 28mm
        60 462 - - 28 310 3600 152
                       

        High Load Low Friction Eye/Ring

                     
        High Load Low Friction Eye/Ring - 12mm
        60 449 12 3 6 - 300 0.8
        High Load Low Friction Eye/Ring - 18mm
        60 450 18 4 9 - 550 3.0
        High Load Low Friction Eye/Ring - 26mm
        60 451 26 6 12 - 800 5.0
        High Load Low Friction Eye/Ring - 38mm
        60 452 38 10 16 - 1800 24.0
        High Load Low Friction Eye/Ring - 52mm
        60 453 52 12 22 - 3300 52.0
        High Load Low Friction Eye/Ring - 65mm
        60 454 65 16 28 - 4500 104.0
        High Load Low Friction Eye/Ring High Load Low Friction Eye/Ring High Load Low Friction Eye/Ring High Load Low Friction Eye/Ring

        Wear resistance

        Independent laboratory tested Using Marlow D2 Dymeena 12 strand line.

        After 450,000 cycles (50,000 metres of line) over 300 hours on an abrasion test machine no visual signs of wear on the anodised coating could be found.

        49er

        Brenta 24

        DSCO 3444 DSCO 3444
        6080yy电影在线看黄瓜