<s id="p9sg4"></s>
<track id="p9sg4"><span id="p9sg4"></span></track>

    1. <option id="p9sg4"></option>
      <track id="p9sg4"></track>
        <track id="p9sg4"></track><track id="p9sg4"></track>
      1. High Load Low Friction Eye/Ring, loops, blocks and foot blocks

        Foot blocks

        Featuring the same side plate and sheave construction as the high load blocks detailed above.

        • Hollow stainless steel rivets allow for through-bolt fastening, giving added strength.
        • Through-bolt mounting also means that these blocks can easily be stacked to achieve double block capabilities. Note; stacking blocks will reduce working loads.
        • Fastenings of the minimum diameter suggested should be used to gain full load capability (click here for fastening size specifications).
        • Ensure that suitable mounting pads are used under deck.

        Foot blocks with cam

        Available in two sizes; specifications as per our high load foot block range. Suitable for a multitude of uses, including locking control lines on headsail furling gear.

        Max holding power of cams: 50mm – 250kg; 65mm – 300kg.

        High load eye with Dyneema loop

        The Barton High load eye with loop is available in 3 sizes and can be used in various applications on board including barber hauler, preventers, mast base block tidies, emergency blocks, occasional blocks and toe rail blocks etc. The High load eye combined with the Dyneema loop gives you a fast, efficient, simple and extremely strong solution to changing the direction of any line. The 'Spectro' anodised aluminium eye is designed to have very good wear resistant properties with low friction, this combined with the Dyneema loop gives you exceptional low weight to very high performance load ratio.

        High Load Low Friction Eye/Ring

        Available in 5 sizes. Manufactured in marine grade aluminium and finished in our unique hard 'Spectro' grey anodising. These lightweight High Load Low Friction Eye/Ring are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast base tidies to stanchion lead eyes. The smallest size can be attached using a 3mm line with a bullseye diameter of 6mm. The largest size can be attached using a 16mm line with a bullseye diameter of 28mm.

        High Load and Foot blocks

        High Load and Foot blocks

        Download drawings as PDFs.
        PDF Foot block - 50mm - 82 995 Dimensions
        PDF Foot block - 65mm - 82 996 Dimensions
        PDF Foot block - 85mm - 82 997 Dimensions

        High Load and Foot blocks

        Important note - foot blocks

        Fastenings of the minimum diameter suggested should be used to gain full load capacity. Ensure that suitable mounting pads are provided under the deck. Stacking blocks to achieve doubles will severely reduce working loads quoted.

         
        Part
        No.
        Sheave
        Ø mm
        Sheave
        width mm
        Rope
        Ø mm
        Break
        Load kg
        SWL
        (Kg)
        Length
        mm
        Weight
        (g)
        High load blocks   SWL SWL SWL SWL Length Weight (g)
        High load blocks - 50mm
        82 100 50 15 12 1000 500 116 146
        High load blocks - 65mm
        82 200 65 18 16 1600 800 142 267
        High load blocks - 85mm
        82 300 85 21 18 3000 1500 185 551
        Foot blocks                
        Foot block - 50mm
        82 995 50 15 12 1000 500 79 114
        Foot block - 65mm
        82 996 65 18 16 1600 800 100 211
        Foot block - 85mm
        82 997 85 21 18 3000 1500 132 427
        Foot blocks with cams                
        Foot block - 50mm
        82 998 50 15 12 1000 500 84 130
        Foot block - 65mm
        82 999 65 18 16 1600 800 105 230
         
        Part
        No.
        Sheave
        Ø mm
        Internal Rope
        Ø mm
        Bore
        Ø mm
        Length
        mm
        SWL
        (Kg)
        Weight
        (g)
        High load eye with Dyneema loop   SWL SWL SWL Length SWL Weight (g)
        High load eye with Dyneema loop - 12mm
        60 460 - - 12 100 750 11
        High load eye with Dyneema loop - 22mm
        60 461 - - 22 230 2400 91
        High load eye with Dyneema loop - 28mm
        60 462 - - 28 310 3600 152
        High Load Low Friction Eye/Ring              
        High load eye 12mm 60 450 12 3 6 - - 0.8
        High load eye 26mm 60 451 26 6 12 - - 5.0
        High load eye 38mm 60 452 38 10 16 - - 24.0
        High load eye 52mm 60 453 52 12 22 - - 52.0
        High load eye 65mm 60 454 65 16 28 - - 104.0

        High Load Blocks

        Manufactured from marine grade aluminium and 'Spectro' grey anodised for high UV stability and durability.

        • Sheaves are precision turned from solid 'Ertalyte' bar with a profile that is kind to modern ropes.

        • Running on a large diameter centre bearing for easy running under high loads.

        • Fitted with a stainless steel bow shackle to allow for snag-free operation.

        • Bolt-together construction not only adds to good looks, but allows for easy dismantling should servicing become necessary.

        • Available in three sizes, these blocks are compatible with the toggle connections on our ball bearing mainsheet travellers click here.


        6080yy电影在线看黄瓜