<s id="p9sg4"></s>
<track id="p9sg4"><span id="p9sg4"></span></track>

    1. <option id="p9sg4"></option>
      <track id="p9sg4"></track>
        <track id="p9sg4"></track><track id="p9sg4"></track>
      1. 25mm 'T' section track, sliders, genoa cars

        Plain bearing genoa cars, sliders and spinnaker pole slides

        A popular range of genoa cars and sliders designed to run on 25mm (1") 'T' track. All are manufactured from high quality marine grade aluminium and finished with our unique
        'Spectro' grey anodised finish for added protection.

        All cars and sliders featured on these pages have moulded nylon inserts to ensure free, smooth running under load and prevent damage to finish or potential corrosion.

        • 'Spectro' grey anodised finish
        • Stainless plunger stops with positive action
        • Moulded nylon slide inserts ensure free running
        • Large, easy-grip plunger knobs.

        25mm 'T' section track

        For use will all sliders featured on this page. Drilled for fastenings and plunger stops. 'Spectro' grey anodised and supplied in metric lengths.

        Genoa Section Track profile Diagram

        Specifications & dimensions

        Width Width W
        Width X
        25mm
        14mm
        Height Height H
        Height J
        10mm
        4mm
        Fastenings Diameter Fastenings Ø 5mm
        Fastening centres Fastening centres 100mm
        Plunger hole centres Plunger hole centres 50mm
        Weight Weight 441g
        per m

         

        25mm 'T' section track, sliders, genoa cars

        Foot Blocks

        Foot blocks

        Designed for use with the genoa cars shown in this range, these strong foot blocks have a three-bolt fixing and can be stacked to achieve doubles (see note below). 'Spectro' grey finish. Precision turned Ertalyte sheaves run on large diameter centre bearing to give low friction performance under high loads.

        Important note – foot blocks:

        Fastenings of the minimum diameter suggested should be used to gain full load capacity. Ensure that suitable mounting pads are provided underdeck. Stacking blocks to achieve doubles will severely reduce working loads quoted.

         

          Sheave Max Rope Break Load SWL Length Length Weight
        Part No. Sheave
        Ømm
        Sheave Width mm Rope
        Ømm
        Break
        Load Kg
        SWL
        kg
        Length
        mm
        Fastenings
        mm
        Weight
        g
        Foot blocks                  
        Foot block - 50mm 82 995 50 15 12 1000 500 79 3 x M6 114
        Foot block - 65mm 82 996 65 18 16 1600 800 100 2 x M6 / 1 x M8 211
        Foot block - 85mm 82 997 85 21 18 3000 1500 132 2 x M8 / 1 x M10 427

        Genoa car with plunger stops

        Features precision turned Ertalyte sheaves running on
        a large diameter centre bearing, for friction-free
        performance under load. Sheaves are designed with
        extra width to accept two sheets. The sheave axle is
        through-bolted and riveted for extra strength.

        Towable genoa cars

        With tow eye or sheave in place of plunger, allowing a
        control line to be lead aft so that genoa car adjustments
        can be made from the cockpit. Use in conjunction with
        end fittings shown.

        Genoa and mainsheet slides

        Have a heavy duty stainless steel attachment loop,
        through-bolted and riveted for extra strength. These units
        will accept most Barton blocks featured on this website.

        Bullseye slide

        Features a swivelling bullseye that will always
        accommodate the correct angle of sheeting. A stainless
        steel insert is provided to prevent wear. Accepts lines
        up to 14mm diameter.

        Spinnaker pole slide

        Have a heavy duty stainless steel ring welded to an
        attachment plate which is through-bolted to the slide.
        Generous ring opening to accept most pole ends.

        Towable spinnaker pole slide has eyes fitted to
        both ends of the slide for the attachment of control lines.
        Use with 25 210 end fittings.

        Stand up blocks

        Have a stainless steel eye fitted to a stainless steel loop,
        through-bolted for strength. The moulded plastic spring/
        gaiter prevents the block tumbling or ropes snagging.
        Two sizes are available – for 10mm and 12mm lines.

        25mm 'T' section track, sliders, genoa cars

          Part No.
        25mm 'T' section track
        per metre 25 000
        0.6 metre 25 010
        1.2 metre 25 020
        1.8 metre 25 030
        2.4 metre 25 040
        3.0 metre 25 050
        5.0 metre 25 060
        Track enc caps (pair) 25 901

         

            Length Width Height Eye internal Ømm Weight
        Part No. Length
        mm
        Width
        mm
        Height
        mm
        Eye internal
        Ømm
        Weight
        g
        Spinnaker pole slides            
        Spinnaker pole slide 25 302 80 42 74 35 237
        Towable spinnaker pole slide 25 304 80 42 74 35 253
            Length Width Height Sheave Max Rope Break Load SWL Weight
        Part No. Length
        mm
        Width
        mm
        Height
        mm
        Sheave
        Ømm
        Max Rope
        Ømm
        Break Load Kg
        SWL
        kg
        Weight
        g
        Genoa cars & towable Genoa cars                  
        Genoa car 25 100 80 42 87 40 2 x 12 2280 1140 247
        Towable Genoa Car 25 200 127 42 87 40 2 x 12 2280 1140 258
        Towable Genoa Car 2:1 Purchase 25 220 170 42 87 40 2 x 12 2280 1140 297
        Towable car end fittings                  
        Track end 25 210 88 37 35 35 8 - - 116
        Track end + becket 25 221 88 37 50 35 8 - - 121
        Mainsheet/Genoa slides & stops                  
        Mainsheet slide 25 300 80 42 42 - - 2860 1430 111
        Genoa slide 25 301 80 42 40 - - 2860 1430 123
        Plunger stop 25 900 30 33 34 - - - - 36
        Bullseye slide                  
        Bullseye slide 25 303 80 42 60 - 14 - - 184
        Stand up block                  
        Stand up block - size 3 25 310 80 42 120 45 10 980 490 223
        Stand up block - size 4 25 311 80 42 142 57 12 1580 790 312
        Track end caps (pair)                  
        Track end caps (supplied in pairs) 25 901 23 - - - - - - 11

        Download fitting instrustions as PDF
        PDF Fitting Towable T Track cars and end fitting

        6080yy电影在线看黄瓜