<s id="p9sg4"></s>
<track id="p9sg4"><span id="p9sg4"></span></track>

    1. <option id="p9sg4"></option>
      <track id="p9sg4"></track>
        <track id="p9sg4"></track><track id="p9sg4"></track>
        • Ratchet Blocks
          Ratchet Blocks
        • Quick Cleats
          Quick Cleats
        • Wear pads and discs
          Clear Wear Pads
        • Wear pads and discs
          New Furler Design
        • Wear pads and discs
          Hinged Rectangler Inspection Hatch covers
        • Wear pads and discs
          Round Inspection Hatch Covers
        • Wear pads and discs
          Victory Wooden Blocks
        • New 9mm Bore High Load Low Friction Eye/Ring
          New 9mm Bore High Load Low Friction Eye/Ring
        • Towable Genoa Car system
          Carbon Tiller Extension - 43500 to 43515
        • Towable Genoa Car system
          K Cam pillar Fairleads
        • Swivel bulls eye with cams
          Winch Handle Pocket
        • Removable mainsheet track system
          Stainless steel rubbing strakes
        • Removable mainsheet track system
          Removable mainsheet track system

        Latest Developments

        Ratchet Blocks

        Barton Marine - Ratchet Blocks
        Click to view full size image

        The new Barton Ratchet Block is designed to be used on mainsheet systems and spinnaker sheets on dinghies and keelboats, and for small yachts up to 30 feet.

        Combining high performance engineering and contemporary design, the 55mm ratchet block is the first in a planned range of sizes, it also offers a stainless steel lever that locks the swivel head if desired.

        The new Ratchet Block allows sailors to easily hand hold loaded lines and offer balance between holding power and controlled easing.

        Designed for low friction and longevity in harsh marine environments, the Ratchet Block body is manufactured from a composite of high density nylon and glass fiber reinforced polymer with a high level of UV protection. Internal components are of marine grade 316 stainless steel and the 12 faced aluminium sheave is anodised in gunmetal silver.
         
        Safe Working Load : 300kg
        Break Load :  1200kg

        Part No.  
        Ratchet Block
        90500
        Quick Cleats

        Barton Marine - Quick Cleats
        Click to view full size image

        Are you looking for a secure alternative for traditional cleats that are specifically designed for kayaks, water toys, paddleboards and fenders? Launching at METSTRADE 2018, the Barton Marine Quick Cleat is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. It’s made of nylon reinforced composite and secures braided lines up to 6mm with a working load limit of 13.5 kilos.  

        Sold in pairs, the Barton Marine Quick Cleat offers exceptional value.   Easy to use, simply rotate the lever on top of the cleat, insert the line and release the lever which secures the rope. From securing fenders, gear, painter lines, buckets, boat gears or other gear, the Barton Marine Quick Cleat is designed to alter rope tension in one direction, but grips the rope firmly and securely in the other. 

        Barton Marine are currently testing new variations of the Quick Cleat for Inflatables, and a larger stainless steel version with greater load rates for a variety of uses on yachts and docks.

        Safe Working Load : 13.5kg
        Max Rope Diameter : 6mm

        Part No.  
        Quick Cleats
        60020
        Clear Wear Pads

        Barton Marine - Clear Wear Pads
        Click to view full size image

        Designed to help sailors and power boaters protect key areas of a boat's deck and superstructure from abrasion, chips, scuffs and wear, our range of wear pads can be applied wherever there is a need to protect a boat's finish without compromising appearance.

        • Highest protection for extreme use
        • Cut to size
        • Fits both curved and flat surfaces
        • Easy to fit
        • UV resistant high bond 3M pressure sensitive backing
        • Excellent resistance to edge lifting, immersion and exposure to salt water
        Clear wear pads
        Part No.  
        Rectangular (pack of 2)
        67170
        Clear Pad width 100mm, 6m roll
        67171
        New Furler Design

        Barton Marine - New Furler Design
        Click to view full size image

        Barton Marine's new design furler makes controlling the jib a breeze, thanks to its improved performance and design features.

        • Redesigned to enhance style and increase performance
        • 3 point line retention
        • Invisible easy furling line attachement
        • Multi position line exit at 30, 90, 150, 215, 270 and 335 degree angles (bow facing)
        • Furling line guides to eliminate line drop

        The furler is easy to self-fit onto dinghies, dayboats and small cruising yachts. The line attachment is invisible to see and with the knot hidden inside the drum, preventing any chance of it catching, wearing or working undone.

        Part no 42334 is designed to use line up to 4mm and Part no 42335 up to 6mm.

        New Furler Design
        Part No.  
        76mm - up to 60 sq ft
        42334
        95mm - up to 100 sq ft
        42335
        Hinged Rectangler Inspection Hatch covers

        Barton Marine - Rectangle Hatch covers
        Click to view full size image

        Barton Marine introduces a new exclusive marine line of high-end T Lock Hatch Covers.

        Made of UV and weather resistant Saralon resin, the heavily reinforced lid hinges through180 degrees, includes a non-slip surface and is impervious to harsh chemicals.

        • Easy lock design
        • Hidden Fasteners
        • Stainless Steel Hinges
        • Integral seal for excellent water resistance
        • UV and weather resistant Saralon resin
        Rectangle Hatch covers
        Part No.  
        248 x 330mm
        40510
        280 x 388mm
        40511
        280 x 483mm
        40512
        330 x 451mm
        40513
        330 x 502mm
        40514
        330 x 610mm
        40515
        Round Inspection Hatch Covers

        Barton Marine - Round Inspection Hatch Covers
        Click to view full size image

        Barton Marine - Round Inspection Hatch Covers

        Barton Marine introduces a new exclusive marine line of high-end T Lock Hatch Covers.

        Made of UV and weather resistant Saralon resin, the heavy reinforced lid hinges through 180 degrees, includes a non slip surface and is impervious to harsh chemicals.

        • Easy lock design
        • Hidden Fasteners
        • Integral seal for excellent water resistance
        • UV and weather resistant Saralon resin
        Round Hatch covers
        Part No.  
        223 mm
        40500
        273 mm
        40502
        Victory Wooden Blocks

        Barton Marine - Victory Wooden Blocks
        Click to view full size image

        Barton marine launches its new "Victory" heritage range of classic, high performance wooden blocks.

        Combining high performance engineering and classic design, a new range of wooden blocks is being launched by Barton marine at this year's METS. Designed for mariners who appreciate elegance and want technical excellence, the new heritage range has been named in honour of the flagship of the British Navy - the HMS Victory.

        • Manufactured from ash wood
        • Natural unfinished or glossy varnished
        • Bolted together for servicing or refinishing
        • High performance sheaves
        • Delrin ball bearings and Torlon needle bearings
        Victory Wooden Blocks
        Part No.  
        30mm sheave
        50030
        45mm sheave
        50045
        60mm sheave
        50060
        80mm sheave
        50080
        New 9mm Bore High Load Low Friction Eye/Ring

        Barton Marine - Carbon Tiller Extensions

        Due to the formidable success of its High Load Low Friction Eye/Ring range, Barton Marine has launched a new size Eye with a 9mm bore for use with control lines up to 4mm. The Safe Working Load is rated at 550kg yet the weight is a staggering 3grams!

        The hard anodising HV500 has amazing low friction properties and after 300 continuous hours on an Independent abrasion test machine no visual signs of wear on the anodising coating could be found.

        The full range is as follows:

        Part No.  
        Bore dia (mm) Weight gms SWL kgs
        60449 6 0.8 300
        60450 9 (new size) 3 550
        60451 12 5 800
        60452 16 24 1800
        60453 22 52 3300
        60454 28 104 4500

        For more information, please click here:
        http://www.xty1688.com/products-high-load-eyes.asp

        Carbon Tiller Extensions

        Barton Marine - Carbon Tiller Extensions
        Click to view full size image

        Features the latest in uni-directional Carbon Fibre tube which incorporates an additional Pullwound spiral layer for optimum strength. Making it stronger than conversational Carbon fibre tube and with our custom designed foam grip handle to reduce fatigue during long periods of use, includes Tiller clip.

        Carbon Tiller Extensions
        Part No.  
        Length 0.6m
        43 500
        Length 0.7m
        43 501
        Length 0.8m
        43 502
        Length 0.9m
        43 503
        Length 1.0m
        43 504
        Length 1.2m
        43 506
        Length 1.5m
        43 509
        Length 2.0m
        43 514
        Length 2.1m
        43 515

         

        Tiller Clip

        Barton Marine - Tiller Clip
        Click to view full size image

        Designed to be used with both Carbon and Aluminium extensions.

         
        Part No.  
        Tiller Clip
        43 605

         

        K Cam pillar Fairleads

        Barton Marine - K Cam pillar Fairleads
        Click to view full size image

        You will notice a continuous 316 stainless steel hoop fitted into the base which allows for wear free, smooth adjustment of the control line from any angle before being cleated into the K Cam.

        Available to fit all three K Cam sizes for lines 5mm to 14mm and loads from 190kg to 260kg, this new design will be available from September 2014.

         
        Part No.  
        'K' cam mini
        70 105
        'K' cam midi
        70 205
        'K' cam maxi
        70 305

         

        Winch Handle Pocket

        Barton Marine - Winch Handle Pocket
        Click to view full size image

        The Barton Winch handle, Part no. 21 053 is manufactured in the UK from flexible dip moulded PVC to enable a wide range of handle types to be stored quickly and securely.

        The pocket measures size 320mm x 90mm x 50mm and requires four fixing screws to attach (not supplied).

        Stainless steel rubbing strakes

        Barton Marine - Removable mainsheet track system
        Click to view full size image

        By popular demand Barton Marine introduces a range of stainless steel rubbing strakes, to help prevent rope wear to deck edges and coamings. Available in three lengths these attractive strakes are easy to fit and will last a lifetime. Part numbers and sizing information is as follows:

         
        Part No.  
        Stainless steel rubbing strakes
         
        203 x 19mm
        67100
        305 x 19mm
        67101
        457 x 19mm
        67102

        Stainless steel rubbing strakes

        Removable mainsheet track system

        Barton Marine - Removable mainsheet track system
        Click to view full size image

        The new Removable Mainsheet Track System, which is ideally suited for all yachts up to 11.0m (36ft).

        This adaptable mainsheet track system is designed to span between the cockpit seats when sailing but is easily removable to ensure cockpit space is not compromised when you want to relax on board.

        The removable track system is available in 2 sizes and can be used on yachts up to a maximum of 11.0m (36ft). The track has a maximum unsupported length of up to 700mm (28in). It can be attached and removed in seconds and uses Barton's beam section track.

        Barton Beam track end fittings (pair)Barton Beam track end fittings (pair) part numbers:

         
        Part No.  
        Beam track end fittings (pair)
         
        Fits Size 1 20 003 Beam track
        20 090
        Fits Size 2 24 003 Beam track
        24 090

        Fitting Barton Marine's new removable track couldn't be simpler, End plates are bolted either side of the cockpit, on the cockpit wall, the track is then slid under these plates and lifted vertically, which automatically locks it in position. To remove the mainsheet track, you just push in the locking pin on either side, lower the track and slide it out of the way.

        Barton Marine recirculating ball bearing mainsheet systems

        Towable Genoa Car system
        Barton Marine - Towable Genoa Car system
        Click to view full size image

        An established favourite with Sailors around the globe, Barton 'T' Track Genoa cars are compatible with all types of 'T' Track. The advantage of a line adjust system is that the crew do not have to leave the safety of the cockpit to obtain perfect trim when reefing the headsail.

        Barton Marine - Genoa Cars - Working Jig Position Barton Marine - Genoa Cars - Genoa Position Barton Marine - Genoa Cars - Full Sail

        We have developed our current design and have incorporate control line sheaves within the body of the sliders and end fittings. The result is a more compact unit with less likelihood of sheet fouling, plus they look great too!

        The towable 'T' Track Genoa car system is available in three sizes for yachts from 6m –12m (18'–40'), this includes 20mm 'T' Track, 25mm 'T' Track and 32mm 'T' Track (both standard & heavy duty options). We have kept the same part numbers as the existing range of towable Genoa cars and towable end fittings, these are as follows:

         
        Part No.  
        Genoa cars and towable end fittings
         
        20mm 'T' Track towable Genoa car
        22 220
        20mm 'T' Track end fitting (single)
        22 221
        25mm 'T' Track towable Genoa car
        25 220
        25mm 'T' Track end fitting (single)
        25 221
        32mm 'T' Track towable Genoa car
        32 210
        32mm 'T' Track towable Genoa car (heavy duty)
        32 211
        32mm 'T' Track end fitting (single)
        32 221

        Barton Marine Genoa Cars - 20mm
        Barton Marine Genoa Cars - 25mm
        Barton Marine Genoa Cars - 32mm

        The brand new Series 0 Cheek Blocks

        High Load Low Friction Eye/Ring
        Click to view full size image

        This month, we are launching the brand new Series 0 Cheek Blocks, which are ideal for use on dinghies and dayboats. Featuring both plain bearing and ball bearing options, this new design is perfect for horizontal or vertical flush mounting on the deck, mast or boom.

        The two fixing holes secure the unit by means of screws or bolts and the maximum line diameter is 5mm.

         
        Part No.  
        Size 0 Cheek Blocks
         
        Plain bearing
        00 160
        Ball bearing
        10 160
        Swivel bulls eye with cams

        Swivel bulls eye with cams
        Click to view full size image

        We have taken a Barton favourite and brought it right up to date. Featuring a newly designed swivel and profiled swivel arm, the Swivel Bullseye is now fitted with a unitary bullseye leading to a Kevlar K Cam and top fairlead.

        Overall the unit is 45grams lighter than its predecessor and rotates even more easily. It’s ideal for cabin top control lines up to 12mm where adjustability from any angle is required, such as the kicking strap on a race boat, jib sheets on a pocket cruiser or spinnaker boom downhaul.

         
        Part No.  
        Swivel bulls eye with cam
         
        Swivel bulls eye with cam
        42 601
        Mast base Organiser

        Barton Marine - Mast base Organiser
        Click to view full size image

        The Barton Mast Base Organiser is finished in our unique 'Spectro' grey anodising for a long lasting finish. It accepts up to four double tang blocks mounted on individual stainless steel swivel posts, but with just three deck fixing points.

        The unit is fitted close to the mast base to accept halyards, reefing lines and topping lift and is designed to work in conjunction with our range of deck organisers, rope clutches and winches, doing away with the need to leave the cockpit when reefing, hoisting or lowering the mainsail.

        Specification comprises:

        • 'Spectro' anodised aluminium base
        • Four stainless steel swivel posts with nylon base washers
        • Four pairs of nylon packing washers for tang blocks (not supplied)


        Technical details:

        Length 160mm
        Width 25mm
        Height 28mm
        Weight 166grms
        SWL 1540kg
        Break 3080kg
        Fixing hole 6mm diameter
        Swivel post 10mm diameter


        Pricing details are included in the new 2011/2012 Price list valid from October 1st 2011.

        High load eye with Dyneema loop

        High load eye with Dyneema loop
        Click to view full size image

          External Max Rope Internal Eye Weight
        Part No. 'D'
        Bore Dia Ø mm
        'L'
        Length mm
        SWL Kg Weight
        g
        60 460 12mm 100mm 750Kg 11g
        60 461 22mm 230mm 2400Kg 91g
        60 462 28mm 310mm 3600Kg 152g

        The Barton High Load eye with loop is available in 3 sizes and can be used in various applications on board including Baber hauler, preventers, mast base block, tidies, emergency, occasional and toe rail blocks etc.

        The High load eye combined with the Dyneema loop gives you a fast, efficient, simple and extremely strong solution to changing the direction of any line. The Spectro anodised aluminium eye is designed to have very good wear resistant properties with low friction, this combined with the Dyneema loop gives you exceptional low weight to very high performance load ratio.

        High Load Eye with Loop Diagram

        Note:
        SWL values have been calculated using a safety factor of 3 from the break load, also please take into account wear and tear on the Dyneema line
        6080yy电影在线看黄瓜